26
Care and Cleaning
Deep Cleaning
Minerals in hard and soft water may deposit at the bottom of the pitcher. Periodic
deep cleaning will ensure the blender’s longevity.
1.
Connect the power cord to a 120 V power source.
2.
Remove the lid and add 1 cup (8 oz / 250 ml) white vinegar or citric acid, and
1 cup (8 oz / 250 ml) of warm water to the pitcher.
3.
Place the lid on the pitcher and press down firmly, then turn the lid clockwise
until it clicks into place.
The lid braces (located on the sides of the lid) must fit over the glass lid-brace
catches (located on the pitcher). Place the pitcher on the blender base.
4.
Allow the solution to sit for at least one hour.
5.
For regular deep cleaning, select
Clean
.
If the food residue is especially stubborn, select
Soup
, then press
Soup
again
to toggle to setting
2
.
6.
Press
Start
to begin.
WARNING
Do not immerse pitcher
in water or other liquid,
and do not cycle through
dishwasher.
Do not immerse blender
base in water or other liquid,
and do not cycle through
dishwasher.
Do not immerse power cord
at any time.
Do not wet prongs of power
cord.
Blades are sharp. To avoid
the risk of severe injury,
unplug blender before
inserting cleaning brush into
pitcher.
WARNING
The blender’s pitcher and base contain electrical components which may cause risk of shock if wet.
