38
16. Install Video driver
After the installation of network card driver, stay in the installation interface of
driver CD and continue with the installation of video driver.
(1) In column “Select OS”, select Windows 2003;
(2) In column “Select Hardware”, select Video driver;
(3) Click <Next> to start the installation;
(4) Enter the interface of “Welcome to the InstallShield Wizard and click <Next>
to continue;
(5) Enter the interface of “Ready to Install the Program” and click <Install> to
start the installation of video driver;
(6) The installation starts and completes; in the interface of “InstallShield Wiz-
ard Completed”, click <Finish>; the system pops up window to prompt that the server
needs to be reboot if you want the setting to take effect; take all the disks out from the
driver and select <Yes> to reboot the server.
17. After the system is restarted, it completes the installation of Windows Server
2008.
5.4 Manually Install Red Hat Enterprise Linux 5.2
5.4.1 Preparation Prior to the Installation
Note: the con
fi
guration of onboard Intel SATA HostRaid does not support Linux
operating system. And here take the con
fi
guration of onboard SATA IDE as an exam-
ple.
●
Installation CD of Red Hat Enterprise Linux 5.2 (
fi
ve pieces of CD or one piece
of DVD, here taking example of DVD for 64bit operating system)
●
Inspur driver CD
●
Please select corresponding driver to the version of made or installed system ac-
cording to the version of the installed operating system.
Notes: On making the above-mentioned drivers, please make the driver into the
fl
oppy disk if using USB
fl
oppy drivers, or make the driver into the Inspur driver U
disk if using the Inspur driver U disk.
5.4.2 Installation Steps
1. Power up to start the system, put the installation CD into the driver (here taking
using DVD installation disk as example), enter BIOS to con
fi
gure and select to boot
from the CD.
2. When the screen displays boot: please press [Enter] to continue; the system be-
Chapter Five Operating System Installation