21
The executable menus of the con
fi
guration interface of SATA HostRaid are the
following
fi
ve:
●
Create RAID Volume
Create RAID Volume
●
Delete RAID Volume
Delete existing RAID Volume
●
Reset Disks to Non-RAID
Reset hard disks of RAID volume to Non-RAID
●
Recovery Volume Options
Select the main disk or recovery disk of Recovery Volume
●
Exit
Exit con
fi
guration interface of SATA HostRaid
I. Create RAID
After entering con
fi
guration interface of SATA HostRaid, select this menu by us-
ing up and down arrow keys, and then press [Enter] to enter the menu of Create RAID.
The system presents the menu options as follows:
Name:
please input volume name which concludes at least 16 characters without
special characters.
RAID Level: please select RAID level; if no volume is created, there are
fi
ve lev-
els for choice, RAID0 (Stripe), RAID1 (Mirror), Recovery, RAID10 and RAID5 (Parity);
please select the level according to actual needs.
RAID0: it allows two or more than two hard disks to create this RAID volume.
RAID1: it allows two hard disks to create this RAID volume.
Chapter Four SATA HostRaid Setup
