Inspur NF8380M5 User Manual Download Page 65

Page: 65 / 135

BIOS Setup

Processor Configuration Interface Instruction Table

Interface Parameters

Function Description

Default Value

Processor Information

Processor information submenu, the processor’s detailed

information

----

Active Cores

CPU core settings. Input the number of CPU cores you want

to enable. In the Help information, it will display the effective

values you can set and the maximum number of physical

cores according to the current CPU usage.

The default value is 0, all cores enabled.

Hyper Threading Technology

Hyper threading technology on-off settings. Options include:

Enabled

Disabled

Enabled

Max CPUID Value Limit

The max CPUID value limit on-off settings.

Enabled

Disabled

When the legacy OS boot does not support CPUID function,

please enable this option.

Disabled

Execute Disable Bit

Execute disable bit on-off setting. Options include:

Enabled

Disabled

Enabled

Intel TXT Support

Intel trusted execution technology on-off settings. Options

include:

Enabled

Disabled

VMX

Intel virtual machine extensions technology on-off settings.

Options include:

Enabled

Disabled

Enabled

SMX

Safe mode extension on-off settings. Options include:

Enabled

Disabled

Summary of Contents for NF8380M5








































































































































Search results

Summary of Contents for NF8380M5

Reviews:

Related manuals for NF8380M5

Brands by name

Popular brands

Inspur NF8380M5, User Manual

Search results

Summary of Contents for NF8380M5

Reviews:

Related manuals for NF8380M5

Brands by name

Popular brands