V1.0
Remove the Inner Rail
Pull the white tab and take out the inner rail.
Rotate the tab (a) and slide the middle rail back.
Install the Inner Rail onto the Server
According to the figure below, install the inner rails marked with L and R side to the right
side of the server.
Installing the Rails
Position the rear bracket of the rail on the rack. Install the left and right rails to the rack
post according to the figure below.
Installing the Server
1. Pull the middle rail fully extended in lock position.
2. Horizontally insert the server into the middle-outer rails.
3. When hit a stop, please pull/push the blue release tab on the inner rails. Push the
server into place.
4. Tighten the screws within the left and right ears of the server.
➊
inner rail
middle rail
outer rail
➋
(a)
K ey
Hole
/
Click
→
Push /
R
L
➊
➋
➊
➌
C lic k
➋
blue
➍
➋
➊
➌
➍
➍
➌
R
L
Rear Bracket
Front Bracket
Rotate
Rotate
Rack-Mounted Server Installation Guide
