background image

Special tips: 

Before  installation  and  operation,  please  read  this  operation  manual  carefully  and  save  this  manual  for  future 
reference. 

WARRANTY  

We make sure that this item is made of high quality materials. 

In normal use, if any problem, we will take charge of maintenance. 

The  warranty  time  for  this  item  is  1  year  (From  the  day  you  buy  it).  If  any  quality  problem  about  this  item, 
please  contact  with  our  services  within  1  year.  Don’t  deal  with  quality  problem  by  yourself  without  any 
authorization. 

If the product you purchased has problems as follows, the manufacturer’s warranty is not effective: 

 

Improper operating, negligence, accident 

 

Improper treatment when problems. 

 

Use the spare parts which are not from us. 

 

Damage from other reasons. 

For easy-wear parts, we don’t provide maintenance and replace for normal use, such as belt. 

This warranty is only valid for home use, and is not suitable for gym or other professional exercise. 

If you want to buy spare parts, please contact with our service and provide this manual. 

TIPS FOR SAFETY 

We  have  considered  more  for  safety  when  we  design  and  produce  this  item.  However,  in  case  of  any 
unhappiness, please pay attention to these tips. We don’t assume responsibility if any accident caused by follow 
tips.  

 

According  to  your  health  condition,  please  exercise  properly.  Overload  or  improper  exercise  will 

damage your health.  

 

While running, you should dress properly. Don’t dress too loosely in case your clothes are entangled by 

the  machine  .And  please  wear  sport  shoes.  Don’t  let  your  children  or  pet  play  near  it  to  avoid 
unnecessary injury.  

 

This  machine  is  not  suitable  for  children.  For  patients  or  the  disabled  to  use,  they  have  to  follow  the 

guides by their guardians or doctors.  

 

Don’t use this machine when in outdoor, high humidity condition or sun. 

 

Please pull the plug off from socket and keep the safe key, when the treadmill is unused. 

 

This machine is for home use, not suitable for professional exercise or testing, and also not suitable for 

medical purpose. 

 

The heart rate on this machine is not suitable for medical. 

 

If any damage  for power  wire, please ask  manufacturer or professional service to replace it in case of 

any danger. 

 

Please check all the parts before using. Make sure that all the nuts or screws are fastened. 

 

Place your treadmill on the clean, flat and solid floor. Make sure that there is not anything pointy, water 

or hot near to the machine. 

 

Please stop exercising immediately and consult your doctor if you’re feel giddy, surfeit, thorax ache or 

other symptoms. 

 

Make sure that hands are not near to running parts. Don’t put your hands or foots under the running belt. 

 

When running this machine, it is only for one person to use it! 

Summary of Contents for Zidaho QS8480C























Reviews: