background image

 

SAFETY INSTRUCTIONS 

 

Read the manual carefully before first use and assembly and keep it for future reference. 

 

Only assemble the device on a flat and clean surface so as not to affect its functionality. 

 

Clean the device regularly. Metal parts can easily rust. 

 

Talk  to  your  doctor  about  your  medical  condition  before  using  the  device.  This  is  especially 

important if you suffer from health problems or limitations. 

 

Exercise  carefully  and  do  not  overextend  yourself.  Exercise  must  match  your  physical 

capabilities. If you feel pain or you are fainting, stop exercising immediately. 

 

Before each exercise, make sure that all bolts and nuts are tight (properly tightened). Replace 

damaged or worn parts immediately. If sharp edges appear on the device, do not use it. Also, 
do not exercise if the device makes atypical sounds. 

 

Do not use the device outdoors. 

 

No adjustable part should protrude so as not to restrict the user's movement. 

 

Keep children and pets away from the device. Do not leave children unattended close or near 

the device. 

 

Do  not  put  your  hands,  feet,  or  hair  near  moving  parts.  Only  place  your  hands  on  the 

designated places. 

 

Exercise sensibly and prevent injuries. 

 

Use  the  device  only  in  accordance  with  the  manual.  Do  not  use  the  device  unless  it  is 

completely assembled. If you are unsure, contact a professional service. 

 

Place the device on a flat and clean surface. For greater safety, keep a distance of min. 0.6 m 

from other room equipment. 

 

Wear  suitable  sportswear  for  exercise.  Do  not  wear  too  loose  clothes  that get easily  caught. 

Always wear closed shoes. Tighten the laces firmly. 

 

The  device  is  not  suitable  for  people  who  suffer  from  diseases  or  health  complications.  The 

device  should  not  be  used  by  people  with  reduced  susceptibility,  delayed  reactions,  or  other 
limitations. People with insufficient exercise experience should also avoid using the device. 

 

The device is not suitable for pregnant women. 

 

The device may only be used by one person at a time. 

 

Do  not  place  sharp  objects  on  or  near  the  device.  Do  not  pinch  or  injure  your  hands  during 

installation. If you hear abnormal sounds or the device is not working correctly, stop using the 
device immediately until the device is repaired.  

 

If the device is not working properly or is damaged contact your supplier.  

 

Use only original spare parts for repairs.  

Weight limit

: 136 kg 

Category

: HC 

– suitable for home use 

WARNING!  The  heart  rate  monitoring  system  may  not  be  accurate.  Overextending  during 
training can cause serious injury or death. If you feel nauseous, stop the exercise immediately! 

Summary of Contents for Verticon 21964



























Reviews: