background image

21 

 

documents  without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these 
documents, the Seller has the right to reject the Warranty Claim. 

If  the  Buyer  gives  notice  of  a  defect  that  is  not  covered  by  the  Warranty  (e.g.  in  the  case  that  the  Warranty 
Conditions  were  not  fulfilled  or  in  the  case  of  reporting  the  defect  by  mistake  etc.),  the  Seller  is  eligible  to 
require  a  compensation  for  all  the  costs  arising  from  the  repair.  The  cost  shall  be  calculated  according  to  the 
valid price list of services and transport costs. 

If  the  Seller  finds  out  (by  testing)  that  the  product  is  not  damaged,  the  Warranty  Claim  is  not  accepted.  The 
Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim. 

In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, 
the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for 
a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a 
fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of 
the Warranty Claim Procedures described in this paragraph. 

The  Seller  shall  settle  the  Warranty  Claim  within  30  days  after  the  delivery  of  the  defective  Goods,  unless  a 
longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer 
is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty 
Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an 
agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the 
Buyer with a financial compensation in the form of a refund. 

 

SEVEN SPORT, s.r.o. 

Borivojova 35/878 130 00 Praha 3, Czech Rebublic   

CRN: 268 47 264, VAT ID: CZ26847264 

Orders:   

 

+420 556 300 970, 

 

 

 

[email protected] 

Warranty Claims: 

+420 556 770 190, Mobile: +420 604 853 019, 

[email protected] 

Service:  

 

+420 556 770 190, Mobile: +420 604 853 019, 

[email protected] 

Fax: 

 

 

+420 556 770 192, (S420 556 770 191) 

Web: 

 

 

www.insportline.cz, www.worker.cz, www.worker-moto.cz 

 

 

 

INSPORTLINE, s.r.o. 

Bratislavska 36, 911 05 Trencin, Slovakia   

 

CRN: 36311723, VAT ID: SK2020177082 

Orders:   

 

+421(0)326 526 701, +421(0)917 649 192,   

[email protected] 

Warranty Claims: 

+421(0)326 526 701, +421(0)918 408 519,   

[email protected] 

Fax: 

 

 

+421(0)326 526 705 

Web: 

 

 

www.insportline.sk, www.worker.sk, www.worker-moto.sk 

 

 

Date of Sale: 

 

 

 

 

 

Stamp and Signature of Seller:  

 

Summary of Contents for R600i






















Reviews: