background image

20 

 

breathing, reduce the speed again by 0.3 km / h. Finally, allow yourself 4 minutes to cool down. If you 
do not want to increase your difficulty with speed, you can increase the difficulty by setting the  incline. 
A gradual increase in the angle of inclination can significantly affect the difficulty of the exercises. 

CALOREIS BURNING - This exercise helps to burn calories faster. First practice for 5 minutes at 4  - 
4.8 km / h, then accelerate every 2 minutes at a speed of 0.3 km / h. Try to exercise for 45 minutes. To 
increase  the  intensity,  you  can  try  to  endure  training  for  about  an  hour.  You  can  watch  TV  during 
exercise.  Once  the  ad  starts,  add  0.3  km  /  h  and  return  to  the  original  speed  when  it's  over.  As  a 
result, there will be more calories in your ads. At the end of the exercise, slowdown 4 minutes. 

CLOTHING 

For exercise, select a pair of good shoes. Do not place anything on the treadmill or device gaps during 
exercise. This prevents possible wear and damage to the device. Dress up comfortably. 

EXERCISE INSTRUCTIONS 

THE WARM UP PHASE 

This stage helps get the blood flowing around the body and the muscles working properly. It will also 
reduce the risk of cramp and muscle injury. It is advisable to do a few stretching exercises as shown 
below.  Each  stretch  should  be  held  for  approximately  30  seconds,  do  not force  or  jerk  your  muscles 
into a stretch. If it hurts, STOP. 

 

 

Touching your toes 

Slowly  bend  your  back  from  hips.  Keep  your  back  and  arms  relaxed 
while  stretching  downwards  to  your  toes.  Do  it  as  far  as  you  are  able 
and hold the position for 15 seconds. Bend your knees slightly. 

 

Shoulder lifts 

Raise your right shoulder up towards your ear and hold for 2 seconds. 
Then repeat for your left shoulder while lowering the right. 

 

Hamstring stretched 

Sit and outstretch your right leg. Rest the sole of  your left foot against 
the inside of your right tight. Stretch out your right arm along your right 
leg  as  far  as  you  can.  Hold  for  15  seconds  and  relax.  Repeat all  with 
your left leg and left arm. 

 

Side stretches 

Raise  your arms above  your head.  Stretch  your right arm towards the 
ceiling  as  far  as  possible.  Stretch  your  upper  body  towards  the  right 
side. Then repeat the exercise for the left side. 

 

Calves and Achilles tendon 

Lean against a wall with your left leg in front of the right one and your 
arms forward. Stretch out your right leg and keep  your left foot on the 
floor. Bend  your left leg and lean forwards by moving  your right hip in 
the direction of the wall. Hold for 15 seconds. Keep your leg stretched 
and repeat exercising with other leg. 

Summary of Contents for Mendoz 4v1




























Reviews: