34
STEP 3
Take the front post (16) and join the upper computer cable (20) with lower computer sensor wire (23). Release
the Tension Knob to allow the tension strap to loosen before connecting the tension cable(19) to the tension
hook (21), when this is completed, finally pull the tension line tight by adjusting the Tension Knob.
STEP 4
Fix the computer (4) to the computer post on the front post (16) with bolts (10). Then connect the computer
cables. Insert the plug of the hand pulse (3) cable to the back of the computer.
Attach the fixed handlebar to the clamp on the front post and fix it tightly with bolts
，
spring washer
（
17
）
and
washers (8).
Insert the handlebar (9) to the oscillating arm and fix them tightly with a screw, a washer (37) and a nut (36).
The same assembly method with the other side.
