NOTE: Continue to turn the front handlebar T-Knob until front handlebar is secure before exercising.
ADJUSTING THE TENSION CONTROL KNOB
To increase the tension, turn the tension control knob in a clockwise direction. To decrease the tension, turn the
tension control knob in a counterclockwise direction.
ADJUSTING THE SEAT FORWARD OR BACK
Release the triangle knob from the rear main frame. Turn the round knob in a counterclockwise direction until it
can be pulled out. Pull out the round knob and then slide the back and seat support bracket back or forth
direction to the suitable position. Lock the back and seat support bracket in place by releasing the round knob
and sliding the back and seat support bracket back or forth slightly until the round knob "pops" down into the
hole of the seat sliding tube. For added safety, tighten the round knob and triangle knob in a clockwise direction.
NOTE: When adjusting the seat back or forth direction, make sure the bushing does not exceed the mark
line on the seat sliding tube.
MAINTENANCE
CLEANING
The recumbent bike can be cleaned with a soft clean damp cloth. Do not use abrasives or solvents on plastic
parts. Please wipe your perspiration off the recumbent bike after each use. Be careful not to get excessive
moisture on the computer display panel as this might cause an electrical hazard or electronics to fail. Please keep
the recumbent bike, especially the computer console out of direct sunlight to prevent screen damage. Please
inspect all assembly bolts, nuts, screws, and pedals on the machine for proper tightness every week.
STORAGE
Store the recumbent bike in a clean and dry environment away from children.
16