3
INTRODUCTION
The Clock offers a variety of standard functions including; clock display, stop watch to the hundredths of a
second, 20 min count down, interval timer and a “Fight Gone Bad” timer. In addition the timer can be
programmed with specific count up, down from times. The timer can also be used to program custom intervals.
The timer can save up to eight custom programs.
OPERATION INSTRUCTIONS
CLOCK DISPLAY
•
Press “Clock” key, clock display time
.
•
Press “Edit” key into setting ,When the numbers blinks, using Number Keys on the remote to change
the time, using“
→
” or “
←
” to select the minutes or hours to be changed. Press “Edit” key again to save
and exit setting. Or “Exit” key to exit setting without saving.
•
Alternate between 12/24 hour format by pressing “Shift” key.
QUICK COUNT UP FROM 00-99:59
•
Press “F1” and then “Enter” timer will execute a 10 sec countdown then will count up from 0:00 to
99:59.
STOPWATCH FUNCTION
(100 min. max count-up with min, sec, and hundredths of a sec)
•
Press “F4”.
•
Timer will display
.
•
Press “Enter” the timer will immediately begin counting up from 00:00:00. The timer will continue to
count up to 99:59:00 unless a change is made.
SETTING UP A CUSTOM “COUNT-UP TO” TIME
•
Press the “
↑
” button. The timer will display
.
•
Press “Edit” key into setting. When the numbers blinks, using Number Keys on the remote to change
the time, using “
→
” or “
←
” to select the minutes or hours to be changed. Press “Edit” key again to save
and exit setting. Or press “Exit” key to exit setting without saving. Or press one of the Function Keys
between “F6” and “F11” to save the program. The timer will beep one times to indicate that the
program is being saved and return to clock mode.
•
Press “Enter” to begin the program. The program will start with a 10 second count down.
•
Once a program is saved simply press the Function Key and the “Enter” to begin the program.
