6
For braking just step on the rear cover (fender) which is over rear wheels.
Don’t jump off while riding.
Brake gets hot through using. Don’t touch it to avoid burns.
Learn to ride properly before first using. If you are not sure, ask some other person for advice.
Keep balance.
Control your speed every time. Your speed must be adequate to the brake performance.
Always be ready to stop your device smoothly and safely.
CLEANING AND MAINTENANCE
Regularly check all parts if they fit well.
Use only natural cleaners to clean it. Never use chemical cleaners.
Store it only in a place with good ventilation and protect it from direct sunlight and dust. Direct
sunlight should decolorize it.
Don’t ride on wet, sandy or oil surface to avoid damage of bearings. Regularly check if wheels
turn well. Turn it over and slightly try to spin the wheels by fingers. If they don’t turn smoothly
dissemble them and check them. Detach the spindle and remove the wheels. Thereafter take
out the bearings. If they are damaged or worn, replace them immediately. If there is no sign of
damage or wearing on them, just lubricate them. Then you can insert the bearings back and
attach the wheels.
Regularly check all wheels for damage or wearing. Especially the rear wheels, because they
brake this device. Replace, if necessary.
Don’t do any improper adjustment or modification. You should decrease safety of this device.
Bolts, nuts and clamps can get loose with time. Check if they fit well. If not, tighten them again.
Replace them, if necessary.
LIGHTS
There are LED lights under covers on both sides of the footplate.
Remove insulation tags at the bottom to activate the lights.
Turning ON the light
Turning OFF the light
