Step 4
Remove two ST4.2x20 Screws (34) from the back of the Computer (38). Remove screws with the Multi Hex
Tool with Phillips Screwdriver provided.
Remove the battery cover that is located on the back of the Computer (38).
Connect the Hand Pulse Sensor Wires (33) and Extension Sensor Wire (58) to the wires that come from the
Computer (38). Tuck wires into the Computer (38). Be careful not to pinch the wires.
Align the Computer (38) into the holes in the Handlebar (5) and replace the battery cover onto the back of the
Computer (38). Finally, using two removed ST4.2x20 Screws (34) to secure the Computer (38) in place.
Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
5
58
33
38
34
Tool:
Multi Hex Tool with Phillips Screwdriver S10,
S13, S14, S15
