Step One:
Connect the Extension Wire (43) to the Sensor (11)
which is in the Lower Vertical Tube (3), and then insert the
Lower Vertical Tube (3) into the Main Frame and fix with
Allen Bolt (48) and Arc Washer (38).
Step Two:
Connect the
Extension
Wire
（
43
）
to the other
Wire
（
43
）
, and then
insert Upper Vertical
Tube (4) into Lower
Vertical Tube (3), then
fasten them with Allen
Bolt (48) and Arc
Washer (38).
Step Three:
Fix the Handlebar (5)
onto Upper Vertical Tube (4)
with Hex Socket Cylindrical
Bolt (46) and Spring Washer
(45) and then cover with the
Handle Chuck Cover (47).
Step Four:
1. Pull the Extension Wire (43) through the hole of Computer Bracket
(6), and then insert Computer Bracket (6) onto the Upper Vertical Tube (4).
2. Connect the Extension Wire (43) with the wire coming from Computer
(7) well and insert the Computer (7) into the Computer Bracket (6).
