11
STEP 2
(x8)
M8*1.25*20L
89
90
(b)
(c)
(d)
(e)
C-1
C-2
C-3
C-4
a-1
a-2
(a)
1) Suggest assembling this step by two persons.
2) First, insert the upper tension cable (89) into the hole of handlebar post (10), remove the
preassembled screw and waved washer from tension cable, then use the spanner to tighten
like fig. (a)
3) Lift up the cover for handlebar post (78) like fig. (b), then connect computer cable (29) with the
cable of motor (30), and connect the end of the upper tension cable (89) and the lower tension
cable (90) like fig. (c)
4) Insert the handlebar post (10) on the main frame and tighten it like fig. (d) by using the curved
washers (6), the spring washers (7) and the Allen bolts (9). Then, place down the cover for
handlebar post (78) and make it tight on the main frame.
5) Assemble the left and right movable handlebar (12L&12R) on the movable handlebar support
(52) by using hardware like fig. (e).