22
LUBRICATING THE TREADMILL
Lubricating the running belt & the running board is essential as the friction affects the life span and
operations of the treadmill. Therefore, we suggest you to inspect the running belt regularly.
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
The following time table is recommended:
Light user (less than 3 hours/week)
Every 6 months
Medium user (3 - 5 hours/week)
Every 3 months
Heavy user (more than 5 hours/week)
Every 2 months
How to lubricate the treadmill:
Lift up the belt on one side and apply a lubricant, then apply lubricate to entire surface with a cloth.
repeat on the other side.
All moving parts must move freely and quietly. Abnormal movement may impair product safety. Check
and tighten all screws regularly.
Proper and regular maintenance extends the lifespan of the treadmill.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Treadmill will not start
Not plugged in.
Plug the cord into the outlet.
Safety key not inserted.
Insert safety key.
Running belt not centered
Running belt tension not proper
on the left or right side of the
running board.
Tighten the adjustment bolts on
the left and right side of the rear
roller.
Summary of Contents for IN 21320
