Insportline IN 21320, User Manual

Page: 21 / 29

21
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve performance on your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides
of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes
clean so that dirt from the shoes does not wear the running belt. Clean the surface of the running belt
using a clean damp cloth. Keep liquids away from electrical parts and running belt.
To prolong the lifespan of the treadmill it is recommended to turn it off every 2 hours of continues use
for at least 10 minutes.
A loose running belt will result in the runner sliding off when running, while too tight running belt will
result in decrease of the motors performance and will also create more friction between the roller and
running belt. The most suitable tightness for the belt is distance of 50-75mm from the running board.
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3.5
– 5 km/h to check and see if the running belt (20)
drifts from the center.
If the running belt (20) drifts to the right, turn the
adjusting bolt on the right side
¼
turn clockwise,
then turn the left adjustment bolt ¼ turn counter-
clockwise. If the belt does not move, repeat this
step until it centers. Refer to image A.
If the running belt (20) drifts to the left, turn the
adjusting bolt on the left side
¼
of a turn
clockwise, then turn the right adjustm
ent bolt ¼
turn counter-clockwise. If the belt does not move,
repeat this step until it centers. Refer to image B.
Over time, the running belt (20) will loosen. To
tighten the belt, turn both the left & right
- side
adjustment bolts one full turn clockwise. Check
the tension of the belt. Continue this process until
belt is at the correct tension. Make sure to adjust
both sides equally to ensure even belt alignment.
Refer to image C.