6
ASSEMBLY
Carefully unpack each component, checking against the parts list that you have all the necessary parts
to complete the assembly of your product. PLEASE NOTE that some of the parts may be pre-fitted to
major components, so please check carefully before contacting our CUSTOMER SUPPORT team.
STEP 1
1. Push the end covers (20) onto ends of the bases (1).
2. Connect bases (1) to the cross bar A (2) using M10 x 65mm bolts (21), M10 washers (28) and
M10 nylon locknuts (30).
STEP 2
1. Attach one upright (5) to the base (1) using M10 x 55mm bolt (23), M10 x 60mm bolts (22),
M10 washers (28) and M10 nylon locknuts (30).
2. Insert one end of the shaft (3) to the upright (5) using M10 x 20mm bolt (24) and M10 washer
(28) and push the other end into hole (
Ø26) of the backrest frame (9) using knob (15) to
locked them.
3. Attach the bench support (10) to bench (9) using M10 x 60mm bolt (22), M10 washers (28),
M10 nylon locknut (30) and insert lock pin (16) into the hole (
Ø11) of the bench (9) to locked
them.
