Insportline IN 11188, User Manual, Page: 11 / 20

11
68 SENSOR BRACKET 1
69 SCREW 2
70 FRONT POST 1
71 MAGNET 1
ASSEMBLY INSTRUCTIONS
GENERAL: Remove all the part of your cycle from the carton and place them to the floor carefully.
Assembling your cycle is simple. Follow these instructions carefully and it should take you around 15-
20 minutes.
STEP 1 ATTACH THE STABILIZERS
Attach rear stabilizer (2) with 2 adjustment end caps (4) to the welded cross bar bracket of main frame
(1) and fasten with 2 flat washers (41) and 2 bolts (40).
Attach front stabilizer (5) with 2 transportation end cap (7) to the welded cross bar bracket of main
frame (1) and fasten with 2 flat washers (41) and 2 bolts (40).
Put the front stabilizer cover (6) to the welded cross bar bracket and fasten with 2 screws (50).
Put the rear stabilizer cover (3) to the welded cross bar bracket and fasten with 2 screws (50).