2
TABLE OF CONTENTS
INSTRUCTION
1) This product is designed to be used as an exercise bike in fitness studios and health clubs. It has a
fixed wheel driven flywheel and should only be used under professional supervision.
2) Installation
– it is important that this exercise bike is correctly assembled and we recommend that
suitably qualified personnel carry out installation and assembly
3)
Handlebar and seat adjustment.
It is important that the handlebar and seat are set at the correct
height for your body. Ask your instructor for assistance. Adjusting the handlebar height - Undo the
release lever that is located where the H-bar post fits into the frame. Slide the handlebar post up or
down to the required height and retighten the release lever. Make sure it is securely tightened and that
there is no lateral or vertical movement of the handlebar. The handlebar position can also be adjusted
forwards or backwards. Undo the Release lever located below the H-bar slider. Slide the handlebar
assembly forwards and backwards until you reach the required position. Then securely re-tighten the
Release lever.
Adjusting the seat heigh
t- undo the release lever located where the seat post fits into the frame.
Adjust the seat to the required height. Then retighten the release lever. Make sure it is tighten
enough to prevent the seat from twisting side to side. The seat position can be adjusted forwards and
backwards. Undo the release lever located directly side of the seat slider. Loosen the release lever
then slide the seat to the required position. Then make sure the release lever retighten.
4)
Pedals and toe straps
- your feet should be securely positioned in the toe clips during the exercise.
Put your foot as far forwards as you can into the toe-clip and then pull the strap tight.
5) The Epsilon should operate on a level surface with no lateral movement. There is height adjuster pad
located on either side underneath of the foot tube. Turn these pads clockwise or anti-clockwise until
the bike is totally stable on the ground.
6)
Emergency brake
– Press down brake system (24) for stop.
7)
Maintenance
– It may be unsafe when loosen bolt on the parts or noise on the flywheel, please contact
your supplier. Like any other mechanical cycling device, the PRO-68 should be regularly maintained.
Ask your supplier for a detailed maintenance program.
8) Class - SC (according to EN ISO 20957) for commercial use.
9) User weight should not exceed 150 kg.
