background image

 

USER MANUAL 

– EN  

IN 24174 Child seat for bike frame inSPORTline Mousino 

 

SAFETY INSTRUCTIONS 

 

Read the manual carefully before use and assembly and keep it for future reference.  

 

Prior to use, make sure that all screws are  tightened, and  the seat  and  handles are properly 

fastened. 

 

The child must have personal protective equipment (protectors, helmet, etc.) 

 

The driver of the bicycle must be over 18 years of age. 

 

Check the condition of the bike before use. 

 

No part of the child's body or clothing should interfere with the moving parts of the bike. 

 

Do not modify the product. 

 

Never leave a child unattended in a seat. 

 

Do not use the product if it is damaged or has sharp edges. 

 

Never exceed the maximum load capacity of the entire bike. 

 

Always place the child's feet on risers with straps and make sure they are  not damaged (you 

must always fasten the straps even when you are not transporting the child). 

 

Ride carefully, the balance of the bike may be affected by the child and the seat. 

 

Use warm water and soap to clean the saddle and soft parts, never use solvents. 

 

Respect the rules of the road, wear a helmet (you and the child) and ride carefully. 

 

Do  not  expose  the  seat  to  high  temperatures  and  make  sure  that  the  seat  is  not  hot  before 

use. 

 

If your kid cannot sit properly, do not transport them. 

Summary of Contents for 24174










Reviews: