4
ASSEMBLY
Place the device on a flat and solid surface.
Measure out the water, do not exceed the marked gauge.
Align the steamer with the main body of the device, there is a mark (Pic
. 2), turn it 90 ° clockwise. The
device is ready for use (Pic. 3).
USE
Use only distilled water or filtered water.
Due to the different quality of tap water, we recommend using only distilled or filtered water.
Do not mix with other liquids, oils, etc.
1. Plug in the device.
2. The steam starts to evaporate 20 seconds after turning on. If you overfill the container, there is
a risk that water droplets will escape with the steam. Do not exceed the marked gauge.
3. The steamer must be at least 20 cm away from the face. If the tank starts to run out of water,
the steam will be weaker. As soon as the water is depleted, the device switches off. If you
want to continue using the device, turn it off, wait 10 minutes, and repeat steps 1 - 3.
Otherwise, turn off the device, wait for it to cool, and store it.
4. Turn off the device after use. Then perform a routine skin care.
