7
ADJUSTING THE HEIGHT OF HANDLEBARS
Open the lever for mounting the handlebar and adjust the height. When you adjust the height lock the
lever for mounting the handlebar. Tightness of the lever is adjusted by the nut.
WARNING
: BEFORE ANY RIDE, CHECK THE CONDITION OF THE SCOOTER, ADJUSTMENT OF
THE RIDING SYSTEM AND MAKE SURE ALL PARTS ARE SECURED AND FUNCTIONAL.
REGURARLY CHECKING THE SCOOTER AND WITH RIGHT MAINTENANCE YOU REDUCE THE
RISK OF INJURIES.
After each use, make sure that all screws are tightened so that the handlebars do not brake.
MAINTENANCE
WARNING: Safety can only be guaranteed by proper maintenance.
•
Bearings
: Ensure that you are not riding on water, oil or sand, as damage to the bearings may
occur. To keep the bearings in good condition, check regularly that the wheels are rotating
correctly - turn the scooter and turn the wheel with your fingers. If they do not rotate, they must
be removed and verified. First unscrew the wheel axle, take out the axle, take apart the wheel
and gently push out both bearings. If they are broken or compressed, you need to buy new
ones. If no damage is visible, they must be oiled. In this case, remove any grease, dirt or dust
from the bearings using a paper towel or cloth, lubricate the bearings with a self-lubricating
spray or grease. Attach the bearings, axles and wheels on the scooter. In the same way
continue with the other wheel.
•
Wheels
: Wheels are worn or can be rustled if they are often used on a rough surface. In
particular, the rear wheel that is used for braking. It is recommended to check them regularly
and replace them for safety purposes.
•
Product
modifications
: The original product cannot be modified, except if the modification is
mentioned in this maintenance manual.
•
Nuts, axles and other self-locking clamping systems:
It is recommended to check them
regularly. They may be either loosen after a while, in which case they need to be tightened
again or lose their effectiveness, in which case they should be replaced as new ones.
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
Don’t put the batteries among house waste but hand them in to the recycling place.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil
Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, also in cases that are not
specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court
in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
