13
STEP 3
•
Assemble the bottom swing arm (6) to the main body and secure with one Allen pan head full-
thread bolt (68), one spring washer (51), one flat washer (45).
•
Assemble the top swing arm (4) onto the bottom swing arm (6) and secure with three Allen
pan head full-thread bolts (69), three curved washers (50) and three hex self-locking nuts (57).
•
Secure the handlebar cover (19) and the handlebar cover (20) at the top of the bottom wing
arm connection using four Phillips CKS full-thread bolts (65).
•
Assemble the right side following the same steps above.
STEP 4
•
Secure the left pedal (31) using one Allen pan head full thread bolt (66) and three Allen pan
head full-thread bolts (67) on the left pedal connection leg (10).
•
Assemble the right side following the same steps.
STEP 5
•
Assemble the left pedal group (8) on the railway and secure with one flat washer (45), one
crank axle screw cover (30) and one Allen pan head full-thread bolt (68).
•
Connect left pedal connection leg (10) with bottom wing arm (6) and secure with one Allen
CKS hollow screw (72).
•
Attach the left bottom swing arm cover (27) and the right bottom swing arm cover (28) on the
left swing arm (6). Secure with two Philips CKS self-tapping screws.
•
Assemble the right side following the same steps.
