6
Cover Installation:
Ultima (BTUF-8130M, BTUF-8140L):
•
Pull on the angle adjustment pull handles (A, G)
to set the backrest and calf supports to the most
upright position (Fig. 3). Slip the cover over the
backrest and adjustment pull handle and then
calf support and pull handle (Fig. 4). Wrap the
velcro straps around the top side-tube and secure
underneath the seating (Fig. 5).
Ultima Access (BTUAF-5130M, BTUAF-5140L):
•
Pull on the back angle adjustment pull handle (A)
to set the backrest support to the most upright
position (Fig. 3). Slip cover over the back rest
and adjustment pull handle (Fig. 4). Wrap the
velcro straps around the seat frame and secure
underneath the seating (Fig. 6).
Adjusting Back Angle:
1. Locate the adjustment pull handle (A) on the back
of the seating under the cover (it is not necessary
to remove the cover to operate the lever).
Using both hands, grip the lever and back
frame and squeeze together.
2. With a lifting motion, adjust the back angle
up or down.
WARNING: Back angle should not be
adjusted when the seating is occupied.
Adjusting Calf Support Angle:
1. On the calf support frame, under the cover, locate
the adjustment pull handle (G) for the Ultima or
the adjustment pull tab (Fig. 1) on each leg for
the Ultima Access. It is not necessary to remove
the cover. Using both hands, grip the lever and
calf support frame and squeeze together for
the Ultima or pull out the pull tabs for the Ultima
Access.
2. With a lifting motion, adjust the angle up or down.
COVER INSTALLATION AND ANGLE SETTINGS
Figure 6
Figure 3
Figure 4
Pull handles
Figure 5
Hook & loop strap
