19
Components and Adjustments
The CSI-2000 Positioning Restraint system includes the following
standard components:
A. 5-Point Safety Harness
D. Crotch Strap Pad
B. Shoulder Harness Pads
E. Lateral Positioning Pads (inside)
C. Adjustable Head Pads/Wings
F. Tether Strap Kit
Operating the Harness Buckle
•
To release, press the red button on the harness buckle.
•
To close, insert one metal latch into the harness buckle until it clicks.
Repeat for the other metal latch.
•
Always make sure both latches are properly fastened in the harness
buckle when securing a user.
•
Never lubricate the harness buckle.
Checking the Harness Height
1. Place the user in the Positioning Restraint System and properly
secure with the harness.
2. Note the position of the harness relative to the shoulder of the user.
•
Harness straps should be inserted in the nearest slot at or above
the user’s shoulder.
•
If the harness height is correct, the restraint can be used with no
further adjustment.
•
If the height of the user’s shoulder is above the harness it will be
necessary to adjust the harness.
See Adjusting the Harness
Height.
A
D
E
C
C
B
F
