NOTE: After bolts in Step 2 are
installed, tighten this 1” bolt first.
Main Upright
Seat Base Frame
1 – 1” Hex Bolt
2 – 4 ¼” Hex Bolts
5
–
3/8”
Flat
Washers
Wood
Block
or
2
–
3/8”
Lock
Nuts
Cardboard
Step 2: Attach Seat Base Frame to Main Upright using: One (3/8” x 1” Hex Bolt)
Two (3/8” x 4 ¼” Hex Bolts)
Five (3/8” Flat Washers)
Two (3/8” Lock Nuts)
NOTE: Wrench tighten the 1” Hex bolt first, then the two 4 ¼” Bolts in Step 2.
Next , wrench tighten the bolts in Step 1.
HINT: For ease of assembly, place a ½” wood block or folded cardboard under center of Main
Upright
before
installing
bolts.
Page 8
STEP 2
