WHAT'S IN THE BOX
1 x Assembled Room Thermostat consisting of
1 x Room Thermostat
1 x Wall Mount
1 x Wall Blanking Plate
1 x Screw Pack
INTRODUCTION
The Ignite Wired (Heating and Hot Water) Thermostat is designed to control a typical domestic
central heating system.
The Thermostat can switch two channels, Central Heating and Hot Water. There is no need for a
separate timer.
Please ensure you have a 4 (S Plan) or 5 (Y Plan) core cable present at the Thermostat
location. If you cannot run a cable, consider using our Ignite Wireless series. Once installed,
your central heating and Hot Water can be switched on and off in response to commands from
the Thermostat or remotely using a computer or Smart Phone.
WARNING Electricity is dangerous.
Before commencing work, ensure that you read and
understand these instructions and isolate the relevant circuit. This product should only be
installed by a qualified electrician or heating engineer
and should be installed in accordance
to BS 7671 (IEE Wiring Regulations), or to another equivalent standard.
2
