BASIC FUNCTIONS (HOT WATER)
Off
Your hot water will be switched off.
Auto
Your hot water will follow your profile times
.
The default is: (This can be adjusted via your online account)
On between 06:00 and 08.30
On between 12:00 and 13:00
On between 18:00 and 20:00
Man
Your hot water will be switched on and will keep your hot water cyclinder at the temperature set
by your tank stat.
Boost
This is used if you would like to switch your hot water on for a set period of time.
The default is 1 hour. When pressed, ‘BOOST HW’ will flash to indicate that boost is currently
active.
Your hot water will switch on for the programmed length of time. After this time has expired, the
hot water function will return to the previous state.
Adjusting the Mode
Pressing the 'HW MODE' key will cycle through the above modes
.
Program Advance
This is used if you would like to ‘jump’ to the next scheduled hot water setting. Press the ‘ADV
HW’ key to ‘jump’ to the next setting in your schedule. It will only have an effect if the hot water
function is in auto mode. Pressing the ‘ADV HW’ key a 2nd time will cancel the program advance
and the unit will revert back to the current profile setting.
11
