Page 17
Step 19: Insert two Guide Rods into the holes in the bottom tube of the Main Frame. Carefully tilt the
Guide Rods back away from the machine. Slide one Rubber Donut into each guide Rod. Slide 15
Weight Plates onto the Guide Rods. Make sure the recessed area on the front of the weight plate
is facing towards the front of the machine. Slide Counter Balance Weight/Selector Stem onto the
Guide Rods. Slide the Top Weight Stop Assembly onto the Guide Rods making sure the rubber
pad is facing down. Attach the Upper Pulley Mount, Top Weight Stop Assembly, and Guide Rods
to the Main Frame Using:
1 - M10 x 75 Hex Bolt
2 - M10 x 90 Hex Bolts
6 - M10 Flat Washers
3 - M10 Locknuts
NOTE: Finger Tighten Only.
1 - M8 x 20 Hex Bolt
1 - M8 Flat Washer
Step 19
2 - M10 x 90 Hex Bolts
1 - M10 x 75 Hex Bolt
6 - M10 Flat Washers
3 - M10 Locknuts
1 - M8 x 20 Hex Bolt
1 - M8 Flat Washer
Upper Pulley
Mount, Left
Top Weight
Stop Assembly
Guide Rods
Counter Balance
Top Weight
Weight
Plates
Rubber Donuts
Front of weight plate has recessed
area for the number sticker
Bottom of weight
plate has three feet
