1
2
Operators should wear protection such as a mask and gloves in
case pieces or components break away from the unit under test.
Attention
Whether the unit is ON or OFF, DO NOT exceed the capacity of
the gauge. NEVER exceed 150% of the rated capacity, or the
torque sensor will be damaged. At 110% of the rated capacity, the
display will flash a warning.
Description
Measure in line tension and compression torques only. DO NOT
attempt to measure torques at an angle to the measuring shaft –
damage to torque sensor and/or shaft may result.
Do not attempt to repair or alter this instrument. Warranty will be
voided and damage to the unit may result.
Use and store within the stated temperature and humidity ranges,
or damage and failure may result.
If not using for extended periods of time, recharge it for every 2 to
3 months. Or remove the batteries to prevent potential battery
leakage from causing product damage.
There are four models of IST-DCT series bottle cap torque tester, the
capacity and resolution is in table on the bottom of the product.
locking hand wheel
mounting holes
clamping lever
function keys
screen
1
Structure and dimension:
2
LCD screen
:
4
1
2
3
5
6
7
8
