5
6
5
Note: Be sure to add and subtract in same unit.
6
Dyna-measuring (Continuous measuring):
Long press to activate the dyna-measuring mode.
You can short press or to pause. After pause, you can
short press to recover and to quit.
7
Countdown measuring:
You can use this function for a more stable measurement.
8
Measuring reference:
Short press to change reference.
9
Unit of measuring:
Long press to change unit of measuring.
10
Area measuring:
Short press once to enable the area measuring.
Standby screen
11
You can repeat the steps for more results.
Short press again after your second measure and the result
will display on screen.
Short press after your first measure to save into memory.
Subtract your measure:
Max and min value will be displayed when moving the dot.
Short press to set time, then short press to measure.
ISN-L70 has three reference: front, rear, pintail.
Area measuring
Short press to measure length and width follow the
instruction on the screen, then the area is showed. You can
change the unit by long pressing .
Volume measuring:
Short press twice to enable the volume measuring.
Note: The front reference surface is indicated as shown.
