7
8
Storage
Mode: There are two storage mode can be selected
under this menu, Single and Series. Touch “UP” or “DOWN”
keys to shift to the next position, touch “EXIT” to abort, and
touch “ENTER” to confirm and back.
Single: Under the measure interface, per touch “SEND” stores
thecurrent display value if it is the default settings for storage.
Series: Continuous storage mode, only in Auto Peak
measuring mode is effective. When the peak keeping time is
up, stores the current display peak value, and then resets the
peak value. Touch “SEND” start, and then touch “SEND” again
the end. In other measuring mode like the Single storage
mode the same.
Browse A to Z: The first page data will be showed when enter
this menu. Touch “UP” or “DOWN” keys to shift to the next
position, touch ENTER” into “Delete or Print” interface, and
touch “EXIT” to back.
“
“
①
The array number
②
Data and display
③
Tension icon
④
Workpiece
⑤
The earlier data
⑥
The later data
unit
Browse
Z
to
A: The last page data will be showed when enter
this menu, other like Browse
A
to
Z
the same.
Browse Selected: Under this menu, the user can choose the
data to browse. The range of data to be browsed should be set
under this menu. Touch “UP” to adjust the value, touch
“
“
DOWN” to shift to the next position, touch EXIT” to abort,
and touch “ENTER” to confirm.
Delete Selected: The range of data to be deleted should be
set under this menu. Touch “UP” to adjust the value, touch
“DOWN” to shift to the next position, touch “EXIT” to abort,
and touch “ENTER” to confirm.
Delete
All: A prompt window will be pushed out under this
menu. All data will be deleted by selection of “YES”, and this
operation will be aborted by selection of “NO” or touch “EXIT”.
System Settings: Under system settings menu, the display mode,
automatic shutdown time, backlight time and so on can be set.
4
Display Mode: Under this menu, user can select the mode of
LCD display, Automatic, Obverse and Reverse can be
selected. Touch “UP” or “DOWN” keys to shift to the next
position, touch “EXIT” to abort, and touch “ENTER” to confirm
and back.
