5
6
Test Mode: Under this menu, the measuring mode can be
selected. There are three kinds of mode: Track, Peak and
Auto Peak.
Track: The real time measuring mode.
Peak: Peak readings will not change until a higher value is
measured.
Auto Peak: When the peak keeping time is up, resets the peak
value automatically.
Touch “UP” or “DOWN” keys to shift to the next position, touch
“EXIT” to abort, and touch “ENTER” to confirm and back.
Peak Time: Under this menu, the peak keeping time can be set
.The range is 1~99 seconds. Touch “UP” to adjust the value,
touch
“
DOWN” to shift to the next position, touch “EXIT” to
abort, and touch
“
ENTER” to confirm and back.
Workpiece: When several samples are needs to be measured,
the samples can be coded. The range is 01-99. When set to
“00” will become “01” automatically. Touch UP” to adjust the
value, touch “DOWN” to shift to the next position, touch EXIT”
to abort, and touch “ENTER” to confirm and back.
“
“
Printing Setup: This menu item contains three selectable items:
Print Recent, Print Selected and Print All. The data saved in
memory can be output to printer through the serial port RS232.
2
Print recent: Print recently stored data, the range is 0~19
groups. Under the measure interface, touch the key “SEND”
also can print the recent data if it is the default settings for
printing. Touch “UP” to adjust the value, touch “DOWN” to
shift to the next position, touch “EXIT” to abort, and touch
“ENTER” to confirm.
Print Selected: Under this menu, user can choose the data to
print. The range of data to be printed should be set under this
menu. Touch “UP” to adjust the value, touch “DOWN” to shift
to the next position, touch “EXIT” to abort, and touch “ENTER”
to confirm.
Print
All: Print all data saved in memory, a prompt window will
be pushed out under this menu. All data will be printed by
selection of “YES”, and this operation will be aborted by
selection of “NO” or touch “EXIT”.
Memory
Management: Under this menu, user can select the
mode of data storage, can also browse, delete, or print the data.
3
