Property Damage:
Do not pinch or
b
reak copper
t
ub
in
g
. Do not
d
i
s
tort the la
s
t 1 inch of t
ub
in
g
.
Make sure to use rubber gasket
to ensure proper seal.
2
B
A
■
Unpack dispenser components.
■
On a firm, flat surface, carefully
straighten the copper tubing.
■
Ensure that the black rubber gasket
is properly seated into the base of
the dispenser head and will
surround the sink mount.
■
Feed tubes down the hole in the
sink or countertop until the base is
at rest on the sink or countertop
surface.
■
From under the sink, place the
semi-circular mounting plate onto the
threaded stud.
■
Place wing nut onto the threaded
stud. Make sure faucet head is at the
desired angle. Tighten the wing nut
until snug, while ensuring the semi-
circular mounting plate extends
beyond the sink hole.
An assistant may be needed to hold
the dispenser head in place
while securing the dispenser.
C
INSTALLING THE FAUCET - H990
H
99
0
H
99
0
H
99
0
Wing Nut
Fiber
Washer
■
Unpack dispenser components.
■
On a firm, flat surface, carefully
straighten the copper tubing.
■
Remove the wing nut from
the valve body.
View / Wave / H
C
3 /
G
N3
For counters less than 3/4" thick
(Fig. 1)
■
Slide 2
1
⁄
4
" fiber washer over faucet
threads under sink. Tighten assembly
using black plastic wing nut.
For counters more than 3/4" thick
(Fig. 2)
■
Thread extension (only included with
View/Wave) onto base of faucet
until tight. Slide 2
1
⁄
4
" fiber washer
over extension under sink. Tighten
assembly using plastic star nut.
■
Feed tubes down through the hole
in the sink or counter until the base
is at rest. Set faucet at desired angle.
Hot &
C
ool models only
■
Remove plug from the Y-shaped
quick-connector by depressing
release ring. Attach the quick
connector to the ends of the copper
tubes running from the dispenser.
■
Install a
white
3/8" tube into
quick connector.
Property Damage:
Do not over ti
g
hten
the pla
s
tic win
g
n
u
t
.
An assistant may be needed to hold
the dispenser head in place
while securing the dispenser.
2
A
C
D
View / Wave / H
C
3 /
G
N3
View / Wave / H
C
3 /
G
N3
Property Damage:
Do not pinch or
b
reak copper
t
ub
in
g
. Do not
d
i
s
tort the la
s
t 1 inch of t
ub
in
g
.
INSTALLING THE FAUCET - VIEW/ WAVE / HC3/ GN3
Hot & Cool models only
Star Nut
Fiber
Washer
Fig. 1
Fig. 2
6
7
1
1
⁄
4
" Hole
Cast Iron or
Hole larger than 1
1
⁄
4
"
■
For a 1
1
⁄
4
" sink hole, stack the
washers in this order on sink deck:
1) 1
5
⁄
8
"
rubber
washer
2) 1
5
⁄
8
"
small
steel washer.
■
For a cast iron sink, or a hole larger
than 1
1
⁄
4
", stack the washers in this
order on sink deck:
1) 2
1
⁄
4
"
large
steel washer
2) 1
5
⁄
8
"
rubber
washer
3) 1
5
⁄
8
"
small
steel washer
B
View / Wave / H
C
3 /
G
N3
BOTH 1
5
⁄
8
"
small steel and rubber washers
MUST BE INSTALLED to ensure
proper operation and seal.
1
5
⁄
8
" Small
Steel Washer
1
5
⁄
8
" Small
Steel Washer
2
1
⁄
4
" Large
Steel Washer
1
5
⁄
8
" Rubber
Washer
1
5
⁄
8
" Rubber
Washer
Summary of Contents for GN3
Page 8: ...N3...
