SPECIFICATIONS
CONSTRUCTION -
Hood and tank constructed of 16 gauge 18-8 type 304 S/S. Hood unit of all welded seamless construction.
S/S frame, legs and feet.
CONVEYOR
-
One S/S roller conveyor chain with tray cradles, through both washer and dryer. Width between guide rails is
factory adjustable from 1.5” to 3.7”. Conveyor accommodates trays up to 15” high. Conveyor drive system includes direct drive
gear motor with frictionless, trouble-free overload release system continuously running.
CONTROLS
-
Top-mounted control cabinet, NEMA 12 rated, housing motor controls and overload protection, transformer and
contactor. All controls safe low voltage 24 VAC.
BLOWER
-
10 HP regenerative blower with Insinger’s specially designed “air wiper” mounted on either side of conveyor. “Air
wipers” are mounted on a diagonal to sweep water in controlled movement preventing splashing and uneven results.
DRAIN
-
All water is drained back into TRAC 321-2 or TRAC 321-2 RPW with a gravity drain connection. Factory installed drain
connection to tray washer provided if dryer is ordered with a TRAC 321-2 or TRAC 321-2 RPW.
UNLOAD TABLE
-
A stainless steel tray unload table receives clean trays. Table constructed with guide rails which ease the trays
onto table.
Capacity
per hour
Shipping weight
Additional current draw Electric Customer Fuse
amps when connected
to traywasher
Motor size
700 lbs.
528 trays
10 hp (blower)
1/15 hp (conveyor)
208/3/60 ............................. 31.0 ............FRN-R-60
240/3/60 ............................28.2 ............FRN-R-60
380/3/50 ...........................17.0 ............FRS-R-35
480/3/60 ...........................14.1 ............FRS-R-30
TD 321-2
CSI
-
11400
3M 10/06
PRINTED IN USA
Information and specifications subject to change without notice
