Insinger speeder series Technical Manual Download Page 8

Page: 8 / 104

Insinger

100 Years of Service

Speeder 64

Note:

For all rough in connections

See Installation and Layout Detail Drawing

SPECIFICATIONS

CONSTRUCTION

—Hood and tank constructed of 16 gauge 18-8 type 304 S/S. Hood unit of all welded seamless construction. S/S frame and legs.

All internal castings are non-corrosive nickel alloy, bronze or S/S investment.

DOOR

—Extra large die formed 18-8 type 304 S/S front inspection door riding in all S/S channels. A triple ply leading edge on the door channels

made of S/S with no plastic or nylon sleeves or liners used. Two intermediate S/S door-safety stops.

CONVEYOR

—One S/S roller conveyor chain with rack inter-locking S/S lugs running every sixth link along the front of the machine. Series of

t w enty-two molded free spinning rollers placed along the back wall of the machine. Conveyor accommodates all standard 20' racks. Conveyor drive
system includes direct drive gear motor with frictionless, trouble-free clutch system, spring-loaded and automatically re-engaging. Racks conveyed
automatically through washing and rinsing systems powered by an independent 1/4 HP conveyor motor.

PUMP

—Centrifugal type "packless" pump with a bronze petcock drain. Construction includes ceramic seal and a balanced cast impeller on a

precision ground stainless steel shaft. All working parts mounted as an assembly and removable as a unit without disturbing pump housing. Two 1
HP motors for wash and rinse standard frame, horizontal C-faced. drip proof, squirrel-cage, induction run type, 60 cycle, internally cooled with ball-
bearing construction.

CONTROLS

—Top-mounted control cabinet, NEMA 12 rated with heat insulation provided between hood and control cabinet, housing motor controls

and overload protection, transformer, contactors and all dishwasher integral controls. All controls safe low voltage 24 VAC.

ENERGY SAVER

—Rack actuated lever automatically operates the final rinse solenoid only when a rack passes, saving water and • energy. The

lever also activates an adjustable timer control. If no rack passes during the set time, the machine shuts down.

SPRAY SYSTEM

—Spray arms made of 18-8 type 304 schedule S/S 40 pipe. Spray assemblies removable without the use of tools. Wash-Upper

and lower manifolds & CrossFire System. One manifold above with 3 power wash arms each designed with 9 high pressure action cleansing slots
and one manifold below with 3 power wash arms each designed with 9 high pressure action cleansing slots. The slots are precision milled for water
control producing a fan spray. Wash arms are fillet welded to the S/S manifold. The CrossRre System provides 4 horizontally spraying high-pressure
nozzles.
Rinse-Upper and lower manifolds. One manifold above with 3 power wash arms each designed with 9 high pressure action cleansing slots and one
manifold below with 3 power wash arms each designed with 9 high pressure action cleaning slots. The slots precision milled for water control
producing a fan spray. Wash arms are fillet welded to the S/S manifold.
Final Rinse—six nozzle assemblies above and three nozzles below threaded into S/S schedule 40 pipes. Nozzle assemblies produce a cone spray
reducing water consumption, maximizing neat retention.

DRAIN

—Drain valves externally controlled. Overflow assemblies with skimmer caps are removable without use of tools for drain line inspection.

Heaters protected by low water level control.

Capacity
per hour

Tank capacity

Motor size

Electric usage

Steam consumption
at 20 psi min.

Final rinse peak
flow at 20 psi
min.

6925 dishes
300-600 meals
277 racks

12 gals. (wash)
13 gals. (rinse)

1 hp(wash)
1 hp (rinse)
1/4 hp (conveyor)