16
NS-TWM41WH8A
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Installing your washer
Tools you will need
Step-by-Step instructions
Step 1: Select a location
Before you install your washer, make sure that the location:
• Is a hard, level surface without carpeting or soft flooring that can obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (32° F or 0° C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer does not rest on its power cord.
Step 2: Connect the water hoses
1
Make sure that there are rubber washers inside the fittings at both ends of each new water hose. Installing the
water supply hoses without rubber washers can cause water leakage.
Note
The water supply hoses are not supplied with your washer and must be
purchased separately.
Caution
• Use new water supply hoses. Using old hoses can result in leakage or
overflow that can damage your property.
• Do not connect multiple water supply hoses together to increase the
length of the hose. Hoses connected this way can leak and cause
electrical shock. If a hose is too short, replace the hose with a longer,
high-pressure hose.
Pliers
Phillips
screwdriver
Level
Washer inlet
hoses
Flat-head
screwdriver
Wrench
Fitting
Rubber washer
NS-TWM41WH8A_17-0655_MAN_V2_EN.fm Page 16 Friday, August 4, 2017 8:10 PM