Insignia NS-LTDVD26-09, User Manual

Page: 10 / 76

10
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
www.insignia-products.com
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Remove the port cover from the back of your
TV (1).
2 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the
ANT.INPUT jack on your TV.
3 Replace the port cover on the back of your
TV.
4 Turn on your TV.
5 Press INPUT , then press / to select TV .
Connecting a standard video device
To connect a standard video device to the
AV1 jacks:
1 Plug an RCA video cable (4) into a standard
video source (5) and into the
VIDEO jack on
the back of your TV.
2 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV.
3 Turn on your TV.
4 Press INPUT , then press / to select AV1 .
To connect an external video device to the
AV2 jacks:
1 Plug the RCA video connector (8) into a
standard video device (5) and
VIDEO jack (6)
on the side of your TV.
2 Plug the RCA audio connectors (7) into the
audio out jacks on the video device and into
the
AUDIO L and AUDIO R jacks (6) on the
side of your TV.
3 Turn on your TV.
4 Press INPUT , then press / to select AV2 .
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the side jacks (AV2). For more permanent
connections, use the rear jacks (AV1).