Insignia NS-LCD27FS, User Manual

Page: 10 / 74

10
Insignia NS-LCD27FS 27” LCD TV
www.insignia-products.com
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
Connecting a sound system
Use the following illustration to connect an audio
processor or Hi-Fi system.
Connecting a VCR
You can connect a VCR with a standard
audio/video cable or with a S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use an audio
cable to connect sound.
Use the following illustration to connect a VCR.
To play the VCR:
1
Turn on your TV.
2 Press the INPUT button one or more times to
select Composite1 (or S-Video if you
connected the VCR to the S0-Video jack).
3 Turn on your VCR.
4 Insert a videotape, then press the PLAY
button.
Warning
Make sure that you turn off and unplug your TV before
installing devices.
Note
For home theater systems, use an S/PDIF cable to achieve full
sound capabilities.
RF switch
Cable converter/descrambler box
Two-set signal
splitter
Out
In
A
B
S/PDIF cable
S/PDIF IN jack
Audio processor
Hi-Fi system
Note
For better video, use the S-Video jack if your VCR has an
S-Video connection.
Warning
Make sure that you turn off and unplug your TV before
installing devices.
S-VIDEO ANT OUT ANT IN
VIDEO L- AUDIO - R
VIDEO L- AUDIO - R
Y
W R
OR
S-Video cable
Audio cable
Video cable
Y=yellow (video)
W=white (audio left)
R=red (audio right)
TV
VCR