Insignia NS-LCD26F, NS-LCD32F, NS-CL26C, User Manual

Page: 9 / 34

7
Insignia NS-LCD26F/NS-LCD32F LCD TV
www.insignia-products.com
To enter a channel number directly:
•
Press the number buttons on the remote
control.
To switch between two channels:
1 Press RECALL to change from the currently
tuned channel to the previous channel.
2 Press RECALL again to change back to the
originally tuned channel.
Changing the picture mode
To change the picture mode:
•
Press PICTURE on the remote control to
cycle through the following modes:
•
STANDARD–normal mode
• SOFT–softens the image
• USER–set the image effect you want
• BRIGHT–suitable for sports images
Programming channels into memory
To select the channel source:
1 Press MENU on the TV or remote control,
then press VOL- or VOL+ to access the
TUNER
menu. The
TUNER
menu opens.
2 Press CH- or CH+ to select CH.SOURCE,
then press VOL- or VOL+ to choose CATV or
AIR.
To automatically program channels into
memory:
1 Press MENU on the TV or remote control,
then press VOL- or VOL+ to access the
TUNER
menu. The
TUNER
menu opens.
2 Press CH- or CH+ to select AUTO SCAN,
then press VOL- or VOL+ to begin searching.
3 The TV searches and memorizes all
channels on the selected antenna input
available in your area.
4 To stop the auto scan, press MENU.
To edit programmed channels:
1 Press MENU on the TV or remote control,
then press VOL- or VOL+ to access the
TUNER menu. The TUNER menu opens.
2 Press CH- or CH+ to select EDIT
PROGRAM, then press VOL- or VOL+ to
enter the sub-menu. The
Edit Program
sub-menu opens.
3 Press DIS./ZOOM to select the channel.
Then you can:
• Label the channel by pressing the VOL+
button.
• Skip the channel by pressing the VOL-
button.
• Delete the label and skip the channel by
pressing the CH+ button.
• Copy the label by pressing the CH-
button.
4 To cancel the action, press the VOL- button.