Insignia NS-LCD26F, NS-LCD32F, NS-CL26C, User Manual

Page: 7 / 34

5
Insignia NS-LCD26F/NS-LCD32F LCD TV
www.insignia-products.com
Connecting to video sources
Connecting to an antenna or cable/satellite
receiver
To connect an external antenna or cable/
satellite receiver:
1 Connect the antenna cable from an antenna
or cable/satellite receiver to the antenna
input jack on the TV.
2 Press the INPUT button to set the TV’s signal
input to TV.
Connecting to a VCR
To connect your TV to a VCR:
1 Turn off the TV and the VCR (or other
source).
2 Connect an RF cable to the VCR, then to the
ANT. jack on the back of the TV.
3 Connect RCA audio cables to the VCR’s
audio output jacks, then to the AV IN L and R
jacks on the back of the TV.
4 Turn on the TV and the VCR.
5 Press the INPUT button to set the TV’s signal
input to TV.
Connecting to a DVD or other video source
To connect your TV to a DVD or other video
source:
1 Turn off the TV and the DVD (or other
source).
2 Connect RCA video and audio cables from
the DVD player to the VIDEO and AUDIO IN
jacks on the back of your TV.
• Yellow - Video
• White - Audio left
• Red - Audio right
- OR -
Connect an S-Video cable and audio cables
from the DVD player to the S-VIDEO and
AUDIO IN (L and R) jacks on the back of your
TV.
• White - Audio left
• Red - Audio right
- OR -
Connect RCA cables to the DVD’s
COMPONENT VIDEO Out jacks and the
AUDIO OUT jacks (L and R), then to the
COMPONENT IN jacks (Y, Cb/Pb, and Cr/Pr)
and the AUDIO IN (L and R) jacks on the
back of the TV.
3 Turn on the TV and the VCR.
4 Press the INPUT button to set the TV’s signal
input to S-VIDEO or YPbPr (as appropriate).
To connect your TV to a DVD player with an
HDMI cable:
1 Turn off the TV and the DVD player.
2 Connect an HDMI cable to the HDMI output
jack on the DVD player, then connect it to the
HDMI jack on your TV.
Note
Objects between the remote control and the
sensor may weaken the remote control’s IR signal.
Range can be diminished by direct sunlight
shining on the TV’s IR sensor.
Cautions
Do not expose the remote control to liquids, direct
sunlight, or shock.
The remote control may not work correctly if the
TV’s IR sensor is under direct sunlight or strong
lighting. In these cases, change the angle of the
lighting or the TV screen, or operate the remote
control closer to the IR sensor.
Notes
• To improve picture quality in a poor signal area,
you can purchase and install a signal amplifier.
• To split the signal from an antenna, you will
need a 2-way signal splitter.