8
www.insigniaproducts.com
STEP 3 -
Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
1
Place spacers (
9
) over the screw holes on the back of the TV.
2
Align the left and right TV brackets (
1
) with the upper screw holes on the back of the TV. Make sure that
the brackets are level.
3
Place washers (
8
) over the holes in the TV brackets. Insert screws (
6
or
7
) through the washers, TV
brackets, and spacers.
4
Install TV standoffs (
2
) in the lower screw holes on the back of the TV using washers (
8
), screws (
6
or
7
),
and spacers (
9
).
5
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
Important:
After attaching the
TV brackets, adjust the straps (by
sliding the buckle up or down)
so they are level with the bottom
of the TV.
6
(4)
9
(4)
1
TV
brackets (2)
8
(4)
7
(4)
or
2
(2)
Phillips screwdriver
Level