Insignia NS-HTVMF0C Installation Manual Download Page 2

2

www.insigniaproducts.com

Safety information and specifications

CAUTION:

 IMPORTANT SAFETY

 

INSTRUCTIONS - SAVE THESE 
INSTRUCTIONS - READ THE 
ENTIRE MANUAL PRIOR TO USE

CAUTION:

 Do not use this product for any 

purpose not explicitly specified by Insignia.
Improper installation may cause property 
damage or personal injury. If you do not 
understand these directions, or have doubts 
about the safety of the installation, contact 
Customer Service or call a qualified contractor. 
Insignia is not responsible for damage or injury 
caused by incorrect installation or use.

CAUTION

: Do not exceed the maximum weight indicated. This mounting system is intended for use only 

with the maximum weights indicated. Use with products heavier than the maximum weights indicated 
may result in collapse of the mount and its accessories, causing possible injury.
The weight of your TV must not exceed 100 lbs. (45.3 kg). The wall must be capable of supporting five times 

the weight of your TV and wall mount combined. 
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young 
children!

Maximum TV weight:

 100 lbs. (45.3 kg)

Screen size:

 40 in. to 70 in. diagonal

Overall dimensions (H × W ):

17.0 × 25.6 in. (43.2 × 65 cm)

Wall-mount weight:

 2.4 lb (1.1 kg)

We’re here for you

www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada markets)

17.0 in. (43.2 cm)

2.97 in. (7.5 cm)

25.6 in. (65 cm)

Summary of Contents for NS-HTVMF0C



















Reviews: