8
NS-HTMS1
www.insigniaproducts.com
Step 2 – Select screws, washers, and spacers
1
Select the hardware for your TV (screws, washers, and spacers). A limited
number of TVs come with mounting hardware included. (If screws came with
your TV, they are almost always in the holes on the back of your TV.) If you
don't know the correct length of the mounting screws your TV requires, test
various sizes by hand threading the screws.
Select the screws that fit:
Use the M4 washers (
04
) with the M4 screws. Use the M6/M8 washers (
05
)
with the M6 or M8 screws.
For an irregular or obstructed TV back, also use the 2.5 mm spacers (
02
),
22 mm spacers (
03
) or a combination of the 2.5 mm and 22 mm spacers. You
can combine spacers
02
and
03
for extra length.
2
Remove the screws.
3
For a flat back TV, go to Step 3 – Option 1: Attach the horizontal brackets to a
flat-back TV on page 9.
-OR-
For an irregular or obstructed back, go to Step 3 – Option 2: Attach the
horizontal brackets to an obstructed or irregularly-shaped TV back on
page 10.
M4 × 12 mm screw (
06
)
M4 × 35 mm screw (
10
)
M6 × 12 mm screw (
07
)
M6 × 35 mm screw (
11
)
M8 ×
16
mm screw (
08
)
M8 × 35 mm screw (
12
)
M8 × 25 mm screw (
09
)
M8 × 50 mm screw (
13
)
CAUTION
: To avoid potential personal injuries and property damage, make sure
that the screws have adequate threads to secure the brackets to your TV. If you
encounter resistance, stop immediately and contact customer service. Use the
shortest screw and spacer combination to accommodate your TV. Using
hardware that is too long may damage your TV. However, using a screw that is
too short may cause your TV to fall from the stand.
Screw is
too long
Screw fits
correctly
Screw is
too short
NS-HTMS1_19-0634_ASSEMBLY_MAN_V1_EN.fm Page 8 Thursday, October 24, 2019 10:34 AM
