7
Universal Swivel TV Base
www.insigniaproducts.com
Assembly instructions
Step 1 – Determine whether your TV has a flat back or an irregular or
obstructed back
1
Carefully place your TV face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2
Temporarily lay the horizontal brackets (
01
) on the back of your TV.
3
Align the screw holes in the brackets with the mounting screw holes on your
TV.
4
Identify which type of back your TV has:
•
Flat back
: The brackets lay flush against the back of your TV and do not
block any jacks. You do not need spacers when assembling your stand.
•
Obstructed back
: The brackets block any of the jacks on the back of your
TV. You need the spacers (
02
or
03
) when assembling your stand.
•
Irregularly-shaped back
: There is a gap between the brackets and some
part of the back of your TV. You need the spacers (
02
or
03
) when
assembling your stand.
5
Remove the brackets.
NS-HTMS1_19-0634_ASSEMBLY_MAN_V1_EN.fm Page 7 Thursday, October 24, 2019 10:34 AM
