23
2-Drawer File Cabinet - Dark Oak
www.insigniaproducts.com
STEP 10: Preparing the drawers
You need:
1
Use a Phillips screwdriver to attach the left drawer side panel (
10
) and the upper right drawer side panel (
17
) to the
drawer back (
12
) with six 3.8 x 40 mm screws (
C
). Make sure that the grooves on the back and side panels face the
inside of the drawer. Don’t overtighten.
2
Use a Phillips screwdriver to attach the two plastic drawer face brackets (
J
) to the insides of the left and right drawer
side panels using four 3.5 x 12 mm screws (
L
). Don’t overtighten.
3
Use a Phillips screwdriver to attach the drawer bottom support bars (
14
) to the drawer back panel (
12
). Make sure
that the large holes for the KD cams are toward the front of the drawer and facing down. Don’t overtighten.
4
Use a Phillips screwdriver to attach the left drawer side panel (
10
) and the lower right drawer side panel (
11
) to the
drawer back (
12
) with six 3.8 x 40 mm screws (
C
). Make sure that the grooves on the back and side panels face the
inside of the drawer. Don’t overtighten.
5
Use a Phillips screwdriver to attach the two plastic drawer face brackets (
J
) to the insides of the left and right drawer
side panels using four 3.5 x 12 mm screws (
L
). Don’t overtighten.
Phillips screwdriver
C
3.8 x 40 mm
screw (12)
L
3.5 x 12 mm
screw (8)
J
Plastic drawer
face bracket (4)
10
Drawer left
side panel (2)
12
Drawer back (2)
14
Drawer bottom
support bars (4)
17
Upper drawer
right side panel
11
Lower drawer
right side panel
