10
www.insigniaproducts.com
6
Insert two wooden dowels (
U
) into the holes on the bottom of each connection bar (
18
).
7
Insert three large KD cams (
E
) into the three holes on the top front edge of the cabinet bottom (
4
). Align as
instructed in Understanding KD cams and KD bolts on page 7, then push the bottom front trim strip together with
the bottom so that the top of the trim strip is flush with the top of the cabinet bottom (
4
). Tighten the KD cams (
E
)
with a Phillips screwdriver.
8
Use a Phillips screwdriver to attach eight 4 x 22 mm screws (
V
) into the holes on both sides of the cabinet bottom.
X4
