background image

13

16” Retro Fan with Tripod Stand

www.insigniaproducts.com

Modification of any part of the Product, including the antenna

Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).

Damage due to incorrect operation or maintenance

Connection to an incorrect voltage or power supply

Attempted repair by any person not authorized by Insignia to service the Product

Products sold “as is” or “with all faults”

Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)

Products where the factory applied serial number has been altered or removed

Loss or Theft of this product or any part of the product

Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) 
grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures 
throughout the display. (Pixel based displays may contain a limited number of pixels that may not 
function normally.)

Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH 
OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES 
FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT 
LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA 
PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND 
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES 
OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN 
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR 
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO 
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY 
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE 
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2016 Best Buy. All rights reserved.
Made in China

NS-F16F7-CH_15-0900_MAN_V1_ENG.fm  Page 13  Friday, February 5, 2016  11:40 AM

Summary of Contents for NS-F16F7-CH















Reviews: